Opis

šifra: 5020405115

Piping foot
za endlerice

bernette b44/b48 Funlock + bernette b64 Airlock

Noga za cijevi osposobljena je za stvaranje ili ušivanje pletenica, ili čak za obje radnje u
jedan korak.
To daje glavne točke kućnom opremanju ili odjeći.

1. Postavite stroj na overlock s 4 niti ili široki Overlock s 3 niti (lijeva igla).

2. Mogu se koristiti užad / cjevovodi koji uključuju tkaninu promjera do 1/8 ”(3 mm).

3. Podignite pritisnuće stopalo i pritisnite “Stopa za cijevi”.

4. Postavite pristranu traku od tkanine oko kabela, rubove tkanine udesno, stavite ispod stopala,
kabel u utor.

5. Spustite stopalo, sašite nekoliko šavova kako biste ga popravili.

6. Podignite stopicu.

7. Postavite dva sloja tkanine, desne strane prema cjevovodu.

8. Spustite pritisnu nogu i šivajte.

Noga za cijevi osposobljena je za izradu ili ušivanje pletenica ili čak za obje radnje
u jednom koraku.
To daje glavne točke kućnom opremanju ili odjeći.

The Piping foot is qualified for creating or sewing in braids, or even both actions in
one step.
That gives main points to home furnishing or garments.

1. Set the machine for a 4-thread overlock or a wide 3-thread overlock (left needle).

2. Cords/Piping including fabric of up to 1/8” (3 mm) diameter can be used.

3. Raise the presser foot and snap on “Piping foot”.

4. Place bias fabric strip around cord, fabric edges to the right, place under the foot,
cord into the groove.

5. Lower the foot, sew a few stitches to fix it.

6. Raise the presser foot.

7. Place the two layers of fabric, right sides towards the piping.

8. Lower the presser foot and sew.

The Piping foot is qualified for creating or sewing in braids, or even both actions
in one step.
That gives main points to home furnishing or garments.

Video

Istaknuti proizvodi