Belt-loop Foot / Bias Tape Folder Foot
za bernette Funlock b42/b48
The belt-loop foot is used to fold bias or straight binding,
which it then quickly and easily turns into straps or
belt loops with the cover- or chainstitch.
With the Bias Tape Folder Foot, create straps and belt loops
easily using a coverstitch.
Just put a strip into the foot and the strip is folded
automatically and stitched in place.
|1. Set machine for “Coverstich”, using needles C & E.|
|2. Note: 1”- 1 1/4” (25-28mm) width tape can be used
(cut bias for more flexibility).
|3. Raise the presser foot and snap on “Belt-loop foot”.|
|4. For easier insertion into the belt-loop foot, trim fabric corners.|
|5. Insert the tape into the guide by using the tweezers to
feed through slot on front of the foot.
|6. Extend tail of bias tape 2” (50mm) behind foot.|
|7. Lower presser foot and sew, belt loops are created
without fabric underneath.
|The belt-loop foot is used to fold bias or straight binding,
which it then quickly and easily turns into straps or belt loops
with the cover- or chainstitch.