za bernette modele b77 / b79
Stopica za šivanje skrivenih zatvarača
An invisible-zipper foot is an ideal tool for a variety
of tasks and projects.
It’s an expert in sewing invisible zippers.
Integrate zippers into items of clothing elegantly
and discreetly, with no visible seam.
This foot can also be used for accessories
and home textiles.
The foot is also easy to use.
Two ridges on the underside act as a guide
and ensure that the rows of teeth
can run through easily.
The fabric part of the zipper then runs
through beneath the foot.
Switch off the machine. Attach the foot as
described in the instruction manual.
For some models, the presser foot holder may
have to be removed. To do this, switch off the machine,
loosen the screw and remove the presser foot holder.
Mount the zipper foot onto the presser foot bar
and secure with the screw.
For invisible zippers. These are special zippers,
which are concealed by the seam once they
are sewn in, making them invisible.
Stitch type: straight stitch
Stitch length: 2.5, adjusted according to the fabric
Needle position: centre
Feed dog: raised
Place the opened zipper on the right side of
the fabric and pin in place.
Sew in the first half of the zipper from top to bottom,
guiding the row of teeth through the left groove
of the presser foot. It may be helpful to tilt the
row of teeth slightly to the left.
Sew down to the slider, then remove the fabric
from the machine.
Attach the second half of the zipper onto the other side.
Place the row of teeth under the right groove of the
presser foot and sew as described above.
Close the zipper and fold the fabric together with
the right sides inside. Place the zipper at the edge
of the fabric.
Close the open seam underneath the zipper,
sewing as near as possible to the zipper.
Tip: it is best to use the normal zipper foot
or the zigzag foot for this.