boja: 1874 Metallic Grey Isamet
šifra artikla: 2937

Amann ISAMET No.40, 1.000m, sastav: 45% polyamid/55% polyester
Metallic embroidery thread-metalizirani konac za štikanje/vezenje

– konac sa metalnom niti – idealan za strojni vez (koristitie samo u kombinaciji sa Metallic iglom-šifra: 154955 te ručno štikanje-zlatovez

ISAMET – Metalni konac za strojni vez

ISAMET je metalni konac za specijalne efekte strojnog vezenja.
ISAMET ima mnogo primjena u industriji amblema i uniformi, kao i ukrasni i ornamentalni vez na elegantnoj odjeći.

– konus od 1000 metara
– pređa omotana od poliestera / poliamida
– metalni konac za vez
– klasični konac u uniformi i vez amblema
– briljantan naglasak za elegantnu odjeću
– dostupan u zlatnoj, srebrnoj i mnogim drugim metalik bojama

Savjeti:
Metalne niti podliježu posebnom proizvodnom procesu i stoga s njima treba posebno pažljivo rukovati.

– koristite s priloženom polinet-pokrivom gdje je potrebno, tako da sprječava klizanje i zapetljavanje konca kada se povuče.
– smanjite napetost glavnog konca igle što je više moguće.
koristite specijalne strojne igle s povećanom ušicom igle prilagođenom za metalizorane konce (šifra: 154955 od Prym).
– brzinu stroja treba prilagoditi odnosno smanjiti prema materijalu za vez i koncu.
– obratite posebnu pozornost na upute za pranje i njegu za tehnike metalik vezenja.

KORISNI SAVJETI I SAVJETI kako se koristiti konac ISAMET

Brzina stroja ovisi o vrsti stroja, materijalu i kvaliteti dizajna

Napetost niti:
Napetost konca treba odabrati na način da ISAMET klizi kroz vodilice niti bez otpora na povlačenje, tj. e. napetost što je moguće niža.

Donji konac bobbinfil za špulicu/kalem:

Za dobivanje dodatne lijepote, potrebna je upotreba najbolje izbalansiranog konca za izgled vezenja.
Preporučujemo Amann ISA 150 donji konac (bijeli ili crni) koji se koristi u kombinaciji sa ISAMET.

Štik dizajn kod strojnog vezenja:
Kod ISAMET 40 treba izbjegavati šavove duljine manje od 3 mm !!!
Molimo provjerite svoj dizajn vezenja tako da mu gustoća i duljina boda odgovaraju !
Za vrlo kratke šavove preporučamo ISAMET No.50 zbog finijeg promjera konca !

Upotreba:
ISAMET je konac s metalik efektom razvijen za strojni vez.
ISAMET No.40 i No.50 koriste se za ambleme i uniformne vezove, ali i za ukrašavanje-zlatovez
Moderna odjeća. Pojedinačni metalni vezovi mogu se jednostavno dizajnirati kao i svaki vrsta kombinacije s ISALON ili ISACORD.

ISAMET – Metallic thread for machine embroidery

ISAMET is a metallic thread for special effects of the machine embroidery. 
ISAMET has many uses in the emblem and uniform embroidery industry,
as well as decorative and ornamental embroidery on elegant clothing.

  • 1000 metre cone
  • polyester / polyamide wrapped yarn
  • metallic embroidery thread
  • classic thread in uniform and emblem embroidery
  • brilliant accent for elegant clothes
  • available in gold, silver and many other metallic colours

Tips:
Metallic threads are subject to a special production process and therefore should be specially handled with care.

  • Use with the enclosed polynet-covering where necessary, so it stops the threadfrom sliding and tangling when it is pulled.
  • Reduce the main needle thread tension as much as possible.
  • When possible use machine needles with enlarged eyes.
  • The machine speed should be adjusted to the embroidery material and the thread.
  • Pay close attention to washing and care instructions for the metallic embroidery techniques.

USEFUL HINTS & ADVICES how to proceed with ISAMET

The machine speed depends on the type of machine, material and design quality

Thread tension:
The thread tension should be chosen in a way that ISAMET slides through the thread guides without drag resistance, i. e. tension as low as possible.

Bobbin-Thread :
The use of a best balanced bobbin thread is required to get an extra nice embroidery look. We recommend SABA c 150 or ISA 150 used in combination with ISAMET.

Embroidery design:
Stitches with less then 3 mm length should be avoided with ISAMET 40.
Please check your embroidery design so the stitch density and stitch length fits to it.
For very short stitches we recommend ISAMET 50 due to the finer thread diameter

Use:
ISAMET is a metallic effect thread developed for the machine embroidery.
ISAMET 40 and 50 are used for emblems and uniform embroideries but also to decorate fashionable clothes. Single metallic embroideries can just be designed as every kind of combination with ISALON or ISACORD.

Preuzimanje-PDF brošure

Amann ISACORD No.40- katalog boja-Farben karta

Istaknuti proizvodi

...

Product has been added to your list.