šifra: 5020601370
Binder attachment
for pre-folded bias tape
za bernette b37/b38

The binder attachment creates practical edge finishes with unfolded
bias tape in a width of 25 to 28 mm.
Self-cut bias tape can also be used
for a professional look.

Instruction

Switch off the machine. Attach the foot as described
in the instruction manual.

Applications:
Binding edges with bias binding

Stitch type: straight stitch (alternative: narrow zigzag)
Stitch length: 2 – 2.5 mm (or as required)
Needle position: centre
Feed dog: raised

Prefolded bias binding
It is possible to use bias binding with a width
of 10-14 mm (final width 5-7 mm).
Non-prefolded bias binding
It is possible to use bias binding with a width
of 23 mm (final width 5-7 mm).

Cut the bias binding diagonally at the start, insert into the
guide of the binder, and if necessary push it through
the hole with a needle or a pair of small scissors.
Guide the bias binding backwards under the foot.
Insert the edge of the fabric to be bound into the guide
between the binding.
If necessary, the needle position or the position of
the guide channel can be adjusted by loosening the
screw so to allow the bias binding to be sewn on close
to the edge.
Sew on the bias binding, ensuring that the bias binding
and the fabric edge are guided in correctly.
Quilted fabrics or several layers of fabric should first
be basted or neatened together before binding.
Alternatively, zigzag stitch can also be used.
Here, the position should be adjusted so that, when
the needle moves to the left, it pierces the fabric just
next to the binding.